2024 [8]

1. Abhishek Kulkarni1, Surendra Kumar Yadav, Virendra Kumar, Ashu Yadav, Shyam Sunder Sharma. A Critical Review on Materials in Additive Manufacturing Technologies, Journal of The Institution of Engineers (India): Series D (2024) [ISSN=2250-2130, SCOPUS, Q3, Springer]. 

2. Md Zakir Hussain, Pranjal Sarmah, Surendra Kumar Yadav, Virendra Kumar, Ashu Yadav, Ashish Goyal, Ankit D. Oza, Chander Prakash, and Virat Khanna, Influence of α-MnO2 and Curing Temperature on Density and Microhardness of Epoxy Nanocomposites, Journal of Nanotechnology, (2024) [I.F=3.9, ESCI, ISSN=1687-9511, Q1, Wiley]

3. Prasanth S, Goutam Ghosh, Praveen Kumar Gupta, Virendra Kumar, Prabhu Paramasivam, The effect of Openings in URM Infills on Seismic Resilience of a Reinforced Concrete Building, Journal of Asian Architecture and Building Engineering,(2024)[I.F.=1.3, SCIE, ISSN=1347-2852, Q1, Tayler & Francis]

4. Pranjal Sarmah, Ravi Kumar, Amrit Thakur, Mohit Sharma, Surendra Kumar Yadav, Virendra Kumar*, Finite Element Analysis of Femur Bone Fracture-Modelling And Analysis,2024, Archives of Thermodynamics [I.F.=0.9, Scopus, ISSN=1231-0956, Polish Academy, Q3]. 

5. Amit Talukdar, Amrit Chakrovorty, Pranjal Sarmah, Prabhu Paramasivam, Virendra Kumar, Surendra Kumar Yadav, and Sathiyamoorthy Manickkam, A Review on Solid Oxide Fuel Cell Technology: An Efficient Energy Conversion System, International Journal of Energy Research, 2024 [I.F.=4.6, SCIE, ISSN=1099-114X].

6. Virendra Kumar, Surendra Kumar Yadav, Anil Kumar, Nishant Kumar Singh, Lalta Prasad. Numerical study on effect of operating pressures on CRKEC-based two-stage ejector. Archives of Thermodynamics, 2024, 45(1), 155-164. [I.F.=0.9, Scopus, ISSN=1231-0956, Polish Academy, Q3].

7. Shivangi Saxena, Lal Bahadur Roy, Praveen Kumar Gupta, Virendra Kumar and Prabhu Paramasivam "Model tests on ordinary and geosynthetic encased stone columns with recycled aggregates as filler material" International Journal of Geo-Engineering, 2024, 15:1 [ESCI, ISSN=2092-9196, I.F.=1.6, Q2].

8. Amit Kumar, Lalta Prasad, Virendra Kumar*, Thermodynamic evaluation of water-cooled photovoltaic thermal system with PCM-based thermal energy storage, Sādhanā, 2023 [SCIE, ISSN=0973-7677, I.F.=1.6, Q2, Springer]. 

2023 [9]

9. Praveen Kumar Gupta, Suyesha Agrawal, Goutam Ghosh, Prasanth S, Virendra Kumar & Prabhu Paramasivam "Seismic Behaviour of the curved bridge with friction pendulum system", Journal of Asian Architecture and Building Engineering,2023 [SCIE, ISSN=13472852, I.F.=1.3, Q1, DOI]. 

10. Arvind Kumar, Surendra Kumar Yadav, Virendra Kumar, Abhishek Kulkarni. A Comprehensive Exploration of Ejector Design, Operational Factors, Performance Metrics, and Practical Applications", Journal of the Brazilian Society of Mechanical Sciences and Engineering, (2024)46:39 [I.F.=2.2, SCIE, ISSN=1806-3691, Q2].

11. Pranjal Samah, Dpankar Das, Madhurjya Saikia, Virendra Kumar, Surendra Kumar Yadav, Prabhu Paramasivam, Shathiri Dhanasekaran. Comprehensive Analysis of Solar Panel Performance and Correlations with Meteorological Parameters, ACS Omega, 2023 [SCIE, ISSN=24701343, I.F.=4.1, Q1, ACS Publication].

12. Pramod Prabhakar Bijlwan, Lalta Prasad, Anshul Sharma, Manoj Kumar Gupta, Virendra Kumar, Experimental study on the mechanical and hygroscopic properties of alkaline treated Grewia optiva / Basalt fiber reinforced polymer composites, Biomass Conversion and Biorefinery, 2023 [Accepted, SCIE, ISSN=21906815, I.F.=4. Q3, Springer].

13. Shweta Singh, Rakesh Kumar Singh, Anil Kumar, Virendra Kumar, and Gopal Nath Tiwari. Recovered Reverse-Osmosis Water and MgO Nanoparticles for Improved Performance of Solar PV/T Systems, water, 15, 2023, 2445. [SCIE, ISSN=2073-4441, I.F.=3.4, Q1, MDPI]

14. Anant Prakash Agrawal, Virendra Kumar, Jitender Kumar, Prabhu Paramasivam, Seshathiri Dhanasekaran, Lalta Prasad. An investigation of combined effect of infill pattern, density, and layer thickness on mechanical properties of 3D printed ABS by fused filament fabrication, HELIYON 9(6)(2023),e16531, doi [ISSN=24058440, SCIE, IF=3.776, Q1, Cell press].

15. Keshab Biswakarma, Pranjal Sarmah, Prabhu Paramasivam, Seshathiri Dhanasekaran, Surendra Kumar Yadav, Virendra Kumar. Experimental probe into an automative engine run on waste cooking oil biodiesel blend at varying engine speeds. Fuel, 346, 2023, 128364[ISSN=1873-7153, SCI, IF=8.035, Q1, Elsevier].

16. Prasanth, S.; Ghosh, G.; Gupta, P.K.; Kumar, V.; Paramasivam, P.; Dhanasekaran, S. “Selection of Response Reduction Factor Considering Resilience Aspect.” Buildings 2023, 13, 626.[ISSN=2075-5309, SCIE, IF=3.324, Q1, MDPI].

17. Aman Kumar, Goutam Ghosh, Praveen Kumar Gupta, Virendra Kumar, Prabhu Paramasivam "Seismic hazard analysis of Silchar city located in North East India” GEOMATICS, NATURAL HAZARDS AND RISK, 14:1, 2023, 2170831  [ISSN=1947-5713, SCIE, IF=3.921, Q2, Taylor & Francis].

2022[6]

18. Praveen Kumar Gupta, Goutam Ghosh, Virendra Kumar, Prabhu Paramasivam, and Seshathiri Dhanasekaran, Effectiveness of LRB in Curved Bridge Isolation: A Numerical Study” Applied Science 2022, 12, 11289.[SCIE, ISSN= 2076-3417, I.F=2.838, Q2].

19. Majid Hussain, Ahmad Rashedi, Niamat Gul, Rana Hadi, Nasreen Khan, Syeda Ghufrana Nadeem, Taslima Khanam, M.R.M. Asyraf, Virendra Kumar “Life cycle environmental sustainability and cumulative energy assessment of biomass pellets biofuel derived from agroforest residues” PLOS ONE, 17 (10), e0275005 2022. [eISSN=1932-6203, SCI, IF=3.25, PLOS, Q1]

20. Shreyas S. Dindorkar, Virendra Kumar, Raj Vardhan Patel, "Adsorption of trivalent and pentavalent arsenic ions from the aqueous stream using natural Bombax ceiba fibers: Insights from density functional theory calculations" Total Environment Research Themes, 3-4, 2022, 100012. [Scupus, ISSN=2772-8099, Elsevier].

21. Lalta Prasad, Arvind Kumar, Ritesh Jaiswal, Anil Kumar, Virendra Kumar, Anshul Yadav, "Mechanical Properties of AA6061T6 and AA6351T6 plates joined by friction stir welding", Material Science and Engineering Technology, 2022. [SCIE, IF=1.034, ISSN=1521-4052, Wiley, Q3].

22. Virendra Kumar, Anil Kumar, Surendra Kumar Yadav, Anshul Yadav, Lalta Prasad, Jerzy Winczek, "Numerical Analysis on Constant Rate of Kinetic Energy Change Based Two-Stage Ejector-Diffuser System", Journal of Mechanical engineering, 68(5), 2022, 368-373. [SCI, IF=1.6, ISSN=0039-2480, Strojniški vestnik, Q3].

23. L. Prasad, R. Bairwan, A. Yadav, A. Kumar, V. Kumar, J. Winczek: " Evaluation of Physical, Mechanical, and Wear Properties of Jatropha Shell Powder Reinforced Epoxy Glass Fiber Composites", Joural of Natural Fibers, (2022). [SCIE, IF=5.323, ISSN=1544-0478, Taylor & Francis, Q1].

2021 [7]

24. A. Kumar, V. Kumar*, P. M. V. Subbarao, G. Singhal, S.K. Yadav “Numerical Assessment on Performance of CRMC Single and Two-Stage Ejector: A Comparative Study” Process Mechanical Engineering, 236 (1), (2021), 114-125. [SCI, ISSN=2041-3009, IF=1.822, Sage, Q2].

25. Lalta Prasad, Vinod Singh, Raj Vardhan Patel, Anshul Yadav, Virendra Kumar & Jerzy Winczek, “Physical and Mechanical Properties of Rambans (Agave) Fiber Reinforced with Polyester Composite Materials”, Journal of Natural Fibers, 19:13, 6104-6118.[ SCIE, IF=5.323, ISSN=1544-0478, Taylor & Francis, Q1]

26. S. K. Yadav, K. M. Pandey, R. Gupta, V. Kumar, Numerical study for the influences of nozzle exit position, length of mixing and diffuser sections on performance of CRMC ejectors, Journal of the Brazilian Society of Mechanical Sciences and Engineering, (2021) 43:496. [SCIE, ISSN= 1806-3691, IF=2.361, Springer, Q2].

27. Lalta Prasad, Niteesh Kumar, Anshul Yadav, Anil Kumar, Virendra Kumar, Jerzy Winczek, In Situ Formation of ZrB2 and Its Influence on Wear and Mechanical Properties of ADC12 Alloy Mixed Matrix Composites, Materials, 14 (9),(2021), 2141, [SCIE, ISSN=1996-1944, IF=3.748, MDPI, Q2].

28. Sanjeev Kumar, Lalta Prasad, Vinay Kumar Patel, Virendra Kumar, Anil Kumar, Anshul Yadav, Jerzy Winczek, Physical and Mechanical Properties of Natural Leaf Fiber-Reinforced Epoxy Polyester Composites, Polymers 13(9)(2021), 1369 [SCIE, IF=5, ISSN= 2073-4360, MDPI, Q1].

29. Anil Kumar, Santosh Kumar, Nilay Krishna Mukhopadhyay, Anshul Yadav, Virendra Kumar, Jerzy Winczek “Effect of Variation of SiC Reinforcement on Wear Behaviour of AZ91 Alloy Composites” materials, 14 (4), (2021), 990 [SCIE, IF=3.748, ISSN 1996-1944, MDPI, Q2].

30. Sanjeev Kumar, Lalta Prasad, Vinay Kumar Patel, Virendra Kumar, Anil Kumar, Anshul Kumar. Physico-Mechanical Properties and Taguchi Optimized Abrasive Wear of Alkali Treated and Fly Ash Reinforced Himalayan Agave Fiber Polyester Composite, Journal of Natural Fibers, (2021) [SCIE, IF=5.323, ISSN=1544-0478, Taylor & Francis, Q1].

2020 [2]

31. Lalta Prasad, Shiv Kumar, Raj Patel, Anshul Yadav, Virendra Kumar, Jerzy Winczek “Physical and Mechanical Behaviour of Sugarcane Bagasse Fibre-Reinforced Epoxy Bio-Composites” materials, 13 (23), (2020), 5387. [SCIE, IF=3.748, ISSN 1996-1944 , MDPI, Q2].

32. Lalta Prasad, Manish Upreti, Virendra Kumar, Anshul Yadav, Anil Kumar. "Optimisation of process parameters during WEDM of EN-42 Spring Steel” SN Applied Sciences, 2 (2020), 947.[SCIE, I.F=2.6, ISSN=2523-3971, Springer Nature, Q2].

2019 [4]

33. Virendra Kumar, P.M.V. Subaarao, G. Singhal, “Effect of Nozzle Exit Position (NXP) on Variable Area Mixing Ejector” SN Applied Sciences, 1 (2019), 1473. [SCIE, I.F.=2.6, ISSN=2523-3971, Springer Nature, Q2].

34. Lalta Prasad, Aruna Saini, Virendra Kumar "Mechanical Performance of Jute and Basalt Fiber Geo-grid-Reinforced Epoxy Hybrid Composite Material" Journal of Natural Fibers, 18(5) (2019), 694-704.  [SCI, IF=5.323; ISSN= 1544-0478, Taylor & Francis, Q2].

35. Lalta Prasad, Gaurav Singh, Anshul Yadav, Virendra Kumar, Anil Kumar, " Properties of functionally gradient composites reinforced with waste natural fillers" Acta Periodica Technologica, 50 (2019) 250-259. [Scopus, ISSN= 2406-095X, Faculty of Technology, Novi Sad].

36. Prabhat Charasia, Anil Kumar, Anshul Yadav, Virendra Kumar, Lalta Prasad “Heat Transfer Augmentation in Automobile’s Radiator using Al2O3-Water Based Nanofluid”, SN Applied Science 1 (2019) 257-264. [ESCI, I.F.=2.6, ISSN= 2523-3971, Springer Nature, Q2].

2018 [1]

37. Virendra Kumar, Gaurav Singhal, PMV Subbarao “Realization of novel constant rate of kinetic energy change (CRKEC) supersonic ejector” Energy 164 (2018): 694-706. [SCI, IF=8.857, ISSN= 0360-5442, Elsevier, Q1].

2014 [1]

38. Prasad, Lalta, B. L. Salvi, and Virendra Kumar "Thermal degradation and gasification characteristics of Tung Shells as an open top downdraft wood gasifier feedstock," Clean Technologies and Environmental Policy 17.6 (2015): 1699-1706. [SCI, IF= 3.636, ISSN=1618954X, Springer Berlin Heidelberg, Q2]

2013 [1]

39. Virendra Kumar, Gaurav Singhal, and P. M. V. Subbarao "Study of supersonic flow in a constant rate of momentum change (CRMC) ejector with frictional effects" Applied Thermal Engineering 60.1 (2013): 61-71. [SCIE, ISSN= 1359-4311, IF=6.465, Elsevier, Q1].

2010 [1]

40. K.M.Pandey, Virendra Kumar "CFD Analysis of Twin Jet Flow At Mach 1.74 with Fluent Software, International Journal of Environmental Science and Development, 1 (2010), 423-428.  [Scopus, ISSN=2010-0264].

Books

1. Dr. Nishant Kumar Singh, Dr. Rajesh Kumar Verma, Dr. Virendra Kumar, J. Paulo Davim, Machining and Tribology of Advanced Materials: From Coatings, Lubrications, Surface Treatments to Modeling and Simulation, De Gruyter, ISBN:9783111376424, 2025.

2. Dr. Virendra Kumar, Dr. Nishant Kumar Singh, Dr. Rajesh Kumar Verma,  Scientific Article Writing and Publication: Essential Skills and Tools, RED’SHINE PUBLICATION, UK, ISBN: 978-1-304-65195-2, 2024.

Book Chapters

1. Nishant K. Singh, Rajeev K. Upadhyay, Virendar Kumar, Abhishek Sharma "Design and Development of Conventional Processes for Medical Implants", Biomedical Implants: Materials, Design, and Manufacturing, Edition: 1st (2024)Imprint CRC Press, DOI eBook ISBN9781003375098.

2. Nishant Kumar Singh, Yashvir Singh, Virendra Kumar, Vinay Pratap Singh "Multifunctional Advanced Ceramics in Aerospace and Aeronautical Engineering: Applications, Challenges, and Future Directions" Advances in Materials Science Research. Volume 67, 2023, ISBN: 979-8-89113-329-7, Nova Science Publishers.

3. Virendra Kumar, Surendra Kumar Yadav "The role of Artificial Nural Network (ANN) in Disaster Prediction and Mitigation" 2023, DIP:18.10.9189764501.025, ISBN:978-91-89764-50-7, Recent Trends in Multidisciplinary Research, Vol. 8, publisher: Redshine publication, Sweden, 186-192.

4. Virendra Kumar, Surendra Kumar Yadav "Role of Artificial Nural Network (ANN) in Enhancing Mechanical Engineering Applications" 2023, DIP:18.10.9189764501.025, ISBN:978-91-89764-50-7, Recent Trends in Multidisciplinary Research, Vol. 8, publisher: Redshine publication, Sweden, 193-201.

5. Surendra Kumar Yadav, Virendra Kumar "Electric Vehicles: Advancements, Challenges and Future Prospects" 2023, DIP:18.10.9189764501.022, ISBN:978-91-89764-50-7, Recent Trends in Multidisciplinary Research, Vol. 8, publisher: Redshine publication, Sweden, 170-176.

6. Surendra Kumar Yadav, Virendra Kumar "Assessing and Reducing Carbon Footprints: A Comprehensive Analysis" 2023, DIP:18.10.9189764501.021, ISBN:978-91-89764-50-7, Recent Trends in Multidisciplinary Research, Vol. 8, publisher: Redshine publication, Sweden, 163-169.

7. Virendra Kumar, S. K. Yadav, Ashu Yadav, Anant Prakash Aggarwal & Anil Kumar "Performance Analysis on the Variable Area Single- and Two-Stage Ejector System at Different Operating Pressures Using Computational Techniques" Biennial International Conference on Future Learning Aspects of Mechanical Engineering, FLAME 2022: Advances in Fluid and Thermal Engineering pp 601–610. [scopus, Publisher:springer, ISSN:978-981-99-2382-3.

8. Prasad, L., Mohan, L., Raturi, H. P., Kumar, V. "A Comparative Study on Mechanical and Dry Sliding Wear Behaviour of Al 7075-T6 Welded Joints Fabricated By FSW, TIG and MIG” Innovative Design, Analysis and Development Practices in Aerospace and Automotive Engineering (I-DAD 2018), Vol. 2., 499-506. [Scopus, Publisher: Springer, ISSN= 978-981-13-2717-9].

9. Abhishek Sharma, Surendra Kumar Yadav, Anshul Yadav, Virendra Kumar, Anil Kumar “Comparison of Static and Harmonic Response of Structural Steel and Aluminium Alloy Automotive Shock Absorbers” Advances in Materials Processing and Manufacturing Applications: Proceedings of iCADMA 2020, Springer Singapore, Vol. 1., 241-249, [Scopus, Publisher: Springer, ISBN=978-981-16-0909-1].

1. Virendra Kumar, PERFORMANCE IMPROVEMENT OF COLD STORAGE VIA ENERGY CONSERVATION USING A TAGUCHI TECHNIQUES, VI- International Antalya Scientific Research and Innovative studies congress, Dec. 02-04, 2023, Antalya, Turkiye.

2. Virendra Kumar, Surendra Kumar Yadav, Nishant Kumar Singh, Anil Kumar, "Numerical assessment on constant rate of kinetic energy change (CKREC) based variable area supersonic nozzle" Materials Today: Proceedings 72 (2023) 2534–2539.

3. Nishant Kumar Singh, Yashvir Singh, Virendra Kumar*, Bhole Singh, “Biodiesel as a potential replacement fuel for CI engine to meet the sustainability criteria: A review,” Material Today: Proceedings (2023) [Scopus, ISSN=2214-7853, Elsevier]

4. Shambhu Pandit, Anant Prakash Agrawal, Parveen Pachauri, Virendra Kumar, Surendra Kumar Yadav “Design of CRMC Non-Adiabatic Supersonic Nozzle with Frictional Effect” Material Today: Proceedings (2023) [Scopus, ISSN=2214-7853, Elsevier].

5. S. K. Yadav, K. M. Pandey, V. Kumar*, R. Gupta “Computational analysis of a supersonic two-stage ejector” Materials Today: Proceedings (2020) [Scopus, ISS=2214-7853, Elsevier].

6. S. K. Yadav, V. Kumar, K. M. Pandey, R. Gupta "Development of the Constant Rate of Momentum Change (CRMC) variable area nozzle" Material Today: Proceeding (2020) [Scopus, ISSN=2214-7853, Elsevier].

7. Ashiwani Kumar, Virendra Kumar, Anil Kumar, Binayaka Nahak, Rajesk Singh “Investigation of Mechanical and Tribological Performance of Marble Dust 7075 Aluminium Alloy Composites”, Materials Today: Proceedings (2020) [Scopus ISSN=2214-7853, Elsevier].

8. Tamanna , Moin Uddin, Virendra Kumar*, Vinod Kumar Yadav ‘Comparative study of the VINCI Robot’s arm end effector matrix using Python and MATLAB”’, Materials Today: Proceedings (2020) [Scopus, ISS=2214-7853, Elsevier].

9. C. P. Singh, R. V. Patel, A. Yadav, A. Kumar, V. Kumar “Fabrication and evaluation of physical and mechanical properties of jute and coir reinforced polymer matrix composite, Materials Today: Proceedings (2020) [Scopus, ISSN=2214-7853, Elsevier].

1. 
   

2. Shambhu Pandit, Anant Prakash Agrawal, Parveen Pachauri, Virendra Kumar, Surendra Kumar Yadav, “Design of CRMC Non-Adiabatic Supersonic Nozzle with Frictional Effect” Recent Advances in Materials and Manufacturing (ICRAMM 2022) Fourth International Conference on Recent Advances in Materials and Manufacturing (ICRAMM 2022) 8-9 Dec. 2022 held at the Department of Mechanical Engineering, Velalar College of Engineering and Technology, Erode, Tamil Nadu, India.

3. Virendra Kumar, A comprehensive study of nozzle and their utilization: Review, 4th International conference on Computational and Experimental Methods in Mechanical Engineering (ICCEMME-2023)09-11 Feb. 2023, Organised by Department of Mechanical Engineering, G L Bajaj Institute of Technology and Management, Greater Noida, India.

4. Kumar, V. Kumar, P. M. V. Subbarao, G. Singhal, S.K. Yadav “Numerical Assessment on Performance of CRMC Single and Two-Stage Ejector: A Comparative Study” 3rd International Conferences, Computational & Experimental Methods in Mechanical Engineering (ICCEME-2021), 11-13th Feb. 2021.

5. S. K. Yadav, K. M. Pandey, V. Kumar, R. Gupta “Computational analysis of a supersonic two-stage ejector” at the international Conference & Exeposition on Mechanical, Material and Manufacturing Technology (ICE3MT2020), organized by the Department of Mechanical Engineering, CVR College of Engineering, Hyderabad, Telangana State, India, Oct. 9-10th 2020.

6. Virendra Kumar, Gaurav Singhal, PMV Subbarao “A NEW APPROACH FOR THE DESIGN OF SUPERSONIC EJECTORS: THE CONSTANT RATE OF KINETIC ENERGY CHANGE (CRKEC) METHOD WITH FRICTIONAL EFFECTS“ 5th international and 41st National conference on Fluid Mechanics and Fluid Power, Dec. 12-14 th 2014. IIT Kanpur, FMFP14 – A – 451.

7. Virendra Kumar, K M Pandey, A P Singh “Study on Free Single Jet Flow: Numerical Analysis with Fluent Software”  The 10th Asian Symposium on Visualization, SRM University.

8. Virendra Kumar, K M Pandey “Studies on supersonic free single jet flow: A numerical analysis with Fluent software” National Conference on Advances in Mechanical Engineering, March 30-31, 2009, organized by Department of Mechanical Engineering, Don Bosco Institute of Technology, Banglore, Karnatka.